AGA Therapeutischer Kipptisch KT-1080/EE

Therapy tilt tables and standing boards

The tilt table/standing board is a versatile therapeutic aid for patient mobilization.

Therapy tilt tables and standing boards for the optimal treatment of diseases and injuries

Therapeutic tilt tables, also known as standing boards, can be used for various therapy methods. Among other things, they enable the patient to be raised up continuously from the shock or lying position to the almost vertical position. These models are therefore ideal for the treatment of neurological diseases as well as head and back injuries or paraplegic patients.

In order to give the patient the physical and psychological safety required during treatment and when getting on and off, the combination of the upholstery cutout at the foot end with the extra-large, removable footboard was developed for the tilting tables.

The therapy tilt tables are available in two widths:

  • Width 800 mm, Article No.: KT-1080/EE,
  • Width 1,000 mm, Article No.: KT-10100/EE.


  • The therapy tilt tables can be adjusted by electric motors from the vertical position (90°) to the horizontal position (0°). The tilting is controlled using a hand switch (alternatively, at no extra charge, with a foot switch).
  • The electromotive height adjustment (520 – 960 mm, measured in the horizontal upholstery position) is controlled via a foot switch (alternatively, at no extra charge, via a hand switch).
  • The height and tilt adjustments are done with maintenance-free and splash-proof and extremely quiet electric drives equipped with key locks. Connection values per motor: 230V, 50/60 Hz., 3.7A, 850W, IPX4, v=11mm/s, 10,000N.
  • The wide support frame, which is equipped with a mobile base on retractable castors, ensures a high level of stability, even under stress.
  • The mobile base on retractable castors, swivel castors Ø 75 mm, locked in place using pedals are by pedals at the head and foot ends (step twice). 
  • The thickness of the two upholstered segments (headrest and main surface) on the tilt tables are:
    • Article No.: KT-1080/EE, each 64 mm,
    • Article No.: KT-10100/EE, each 67 mm.
  • The headrest can adjusted up to +35° using a grid with 13 locking steps.

Technical data

 Therapy tilt tables
Article numberKT-1080/EEKT-10100/EE

Headrest/main section

1,900 mm
500 / 1,400 mm
Width800 mm
(860 mm with standard rails)
1,000 mm 
(1,060 mm with standard rails)

Height adjustment

520 - 960 mm (electric motor)
Tilt adjustment 0º / +90º (electric motor)

Upholstery segments

2 sections

Upholstery thickness

64 mm67 mm

Headrest adjustment


Load capacity

130 kg
The standard configuration includes:
  • A pair of side-mounted surgical rails, dimensions 25 x 10 mm, made of CrNi steel, length 1,560 mm.
  • A removable footboard, dimensions 800 / 1,000 x 320 mm (W x D), frame plastic-coated, tread covered with synthetic leather.
  • The hand and foot switches.
  • A cutout at the foot of the main section to make getting on and off easier.
  • Substructure as a mobile base on retractable castors, swivel castors Ø 75 mm.
  • Floor protectors (clip-on caps) on the four adjustable feet.
  • An integrated protractor.

We offer the coloured lacquer coating of the frames as standard in the following three shades (see frame colour selection card):

  • light grey (RAL 7035)
  • white aluminum (RAL 9006)
  • pure white (RAL 9010).

The high quality finish has a glossy look. It is disinfectant resistant and easy to clean.

Other colours are of course also available. Please let us know the desired RAL colour so that we can find out the corresponding additional costs. Please note, however, that these products are then considered type variants with no right of return. 

The artificial leather covers we use are characterized by their tear resistance, durability, longevity and their good cleaning properties as well as their resistance to disinfectants.

We use a (colour) selection from the synthetic leather covers VOWAled Pisa (Vowalon). The colour selection card can be found here.

In addition, we offer you the service of manufacturing the upholstery in other colours or from other synthetic leather manufacturers (type variant). After prior agreement, please send us the relevant references.

The black electrically conductive synthetic leather cover (with equipotential bonding socket on the frame) is available at an additional cost. It is already included in the price of the operating tables and multifunction tables.

Image galleries

The photos show the therapy tilt table, Article No.: KT-1080/EE, in the colours:

  • Frame: light grey RAL 7035,
  • Upholstery: blue.

The photos show details of the therapy tilt table, Article No.: KT-1080/EE, in particular:

  • The integrated protractor,
  • The mobile base with retractable castors.

Accessories & additional options

Article No.

A-2047Arm support, swivel-mounted, black PU-foam arm shell, dimensions approx. 400 x 120 mm (L x W), with 2 Velcro fasteners to secure the arm to the shell, chrome-plated holder with attachment for standard rail.


Paper roll holder, for table width 800 mm.
Paper roll holder, for table width 1,000 mm.
With mounting hardware, chrome-plated, consisting of two mounting kits (square steel tube 30 x 30 x 2 mm, length approx. 150 mm), two brackets, two clamps and a paper roll holder rod (length 795 / 995 mm, Ø 20 x 1 mm), for mounting on the upholstery frame.


Patient belt, dimensions 2,600 x 250 mm (L x W), sewn from synthetic leather, with Velcro closure (hook and loops straps), see upholstery colours.

The accessory components mentioned above are just a small excerpt. The following accessories are also available: face cutout in the headrest and upholstered insert for closing it, positioning aids, anesthesia pole, shoulder/side supports, side guards, side supports.

More accessories

Product variants

As a manufacturer, we are able to adapt our products to your individual needs. Below, you will find examples of customer-specific requests we have implemented.

The therapy tilt tables can, for example, be delivered with a one-piece, continuous tabletop or a different synthetic leather cover colour. We will be pleased to provide further pricing information upon request.

Questions? Contact us today!

Do you have questions about our products or services? Would like to get to know us? Contact us today, we will be pleased to provide expert advice tailored to your needs.


Product videos

Illustration of the electric height adjustment of the AGA-PHLEBO-LIFT phlebology table, Article No.: VEKO-1060/EE, equipped with the protractor, Article No.: WM-30, the central locking castor system, Article No.: LR/Z-50, and the heel rest, Article No.: FR-60, as well as the Trendelenburg adjustment, degree display and the mobility.

Standard rails OPS-170/AExternal Video (youtube)

Illustration of the standard surgical rails, Article No.: OPS-170/A.

More products to discover