Sie sind hier: Home > Products > Multi-Function Examination Tables > AGA-DUO-LIFTO-MED

AGA-DUO-LIFTO-MED Multi-function examination table

With their divided tabletop, comprehensive range of equipment options and included accessories, the AGA multi-function examination tables can be used not only in general medicine but also in surgical, gynaecological, proctology and rectoscopy practices.

The AGA-DUO-LIFTO-MED (Article No. H-U 2065/3EE) multi-function examination table is an alternative to the AGA-UNI-MED.

H-U 2065/3EE
H-U 2065/3EE

A versatile examination table, suitable for many specialties

The three-piece tabletop has an upholstery thickness of 64 mm. The tabletop sections are continuously adjustable, as required, independently of each other for optimal patient treatment positioning, and secured with a clamping rod locking mechanism.

  • The continuous backrest adjustment is gas pressure spring assisted for ease of use.
  • A pelvic cut-out was inserted in the tabletop frame and upholstered seat.
  • Levelling screws fitted into the wide base provide enhanced stability on any type of floor.

Dual anodized aluminium lifting columns controlled by low-voltage, ultra-quiet electric motors and a hand module allowing simultaneous height and tilt adjustment. Drive specifications for each motor: 230V, 50/60Hz, 2,0A, 120W, IP20, v=16mm/s, 1000N. With full use of both motorized adjustments, a Trendelenburg and reverse Trendelenburg positioning up to 15° may be obtained.

LR-75
LR-75
LR/Z-125
LR/Z-125
Mobility Options

The height-adjustable multi-function tables are also available in a mobile version, with :

  • Castors, Ø 75 mm - Article No. LR-75
  • Castors, Ø 125 mm - Article No. LR-125

A set includes four castors, two of which are lockable.

  • Central locking castor system - Article No. LR/Z-125 for enhanced maneuverability and comfort of use.

All four double castors (Ø 125 mm) are connected by rods. A foot pedal to lock in position or release is located at the head and foot ends of the table.

Accessories

Many accessories can be mounted onto the standard rails, including:

  • Armrest - Article No. A-2047
  • Anesthesia pole - Article No. NB-3000
  • Instrument table - Article No. IT-3060
  • Side safety rail - Article No. SG-1000/BK

The corresponding product descriptions and article numbers can be found under OR Accessories and in the AGA catalogue on page 33.

Further accessories such as positioning aids, regular castors, retractable castors, double castors with central locking system, headrest adjustment by grid, face cutout and upholstered insert, mounting clamps, ring armrests and leg rests can be found on catalogue pages 72-73 and 94-95.

A-2047
A-2047
NB-30560
NB-30560
IT-3060
IT-3060
SG-1000/BK
SG-1000/BK

Continuous adjustment of the headrest

The AGA-DUO-LIFTO-MED multifonction examination table includes

  • a pair of leg rests with plastic shells and mounting clamps
  • a set of two standard rails (length 1700mm)
  • a stainless steel pan
  • a paper roll holder
H-U 2065/3EE
H-U 2065/3EE
H-U 2065/3EE
H-U 2065/3EE

AGA-DUO-LIFTO-MED - Overview

  • Height adjustment range 600 - 850 mm (electric with foot switch)
  • Trendelenburg / Anti-Trendelenburg position  15° (electric with foot switch)
  • Simultaneous height and tilt adjustment
  • Headrest and pelvic tilt adjustment mechanisms - continuous with clamping rod locking mechanism
  • Backrest adjustment with gas pressure spring
  • Pelvic cut-out
  • Width 650 mm
  • Length 1900 mm (headrest 500 mm, backrest 1050 mm, seat section 350 mm)
  • Maximum load 150 kg, product weight - 100 kg
  • Frame Tabletop frame - chrome-plated /Leg frame - lacquered, see Frame Colours
  • Upholstery thickness 64 mm - 21 Upholstery Colours available
AGA frame colours
Frame

  • The colour coating of the frame is available as a standard in three different colours (See colour selection card on the right):

    • light grey (RAL 7035),
    • white aluminium (RAL 9006),
    • pure white (RAL 9010).

  • The high-quality paint has a glossy finish, is easy to clean and resistant to disinfectants.

  • A different colour scheme (special order) is possible at extra charge, and subject to prior arrangements. Please notify us of the desired RAL colour.
AGA upholstery colours
Upholstery
  • The synthetic leathers used for the upholstery of our products, Stamskin® Top (Ferrari) and VOWAled Pisa (Vowalon) are characterized by their tensile strength, durability, longevity, easy cleaning and resistance to disinfectants. There are 21 colours to choose from.

  • We also offer the option of having the upholstery done in other colours or brands of synthetic leather. The corresponding materials should be sent to us after prior arrangement.

  • The electrically conductive (antistatic) synthetic leather upholstery (with earth contact) is available at extra charge (MEDISTAT). It is, however, included in the price for the operation and multi-function tables.
Article Numbers
Article Number Length x Width (mm) Height (mm) Frame Max. load
H-U 2065/3EE 1900 x 650 600 - 850 Chrome/Lacquered 150 kg

The corresponding product descriptions and article numbers can also be found in the AGA product catalogue on page 99.


AGA offers a wide range of multi-function tables

Further multi-function tables, with different features or with fixed height also available from AGA.

A-2065/EE
A-2065/EE
H-U 2065/3EE
H-U 2065/3EE
HK-2065/3H
HK-2065/3H
K-2065/3
K-2065/3
MULTIFLEX II
MULTIFLEX II
BOZ-1070/3S
BOZ-1070/3S
Contact us
Logo von AGA Sanitätsartikel

+49 (0) 5731 82283

info@agasan.com