Sie sind hier: Home > Products > Examination chairs and accessories > AGA-RE-PRO & AGA-RE-PRO-LIFT - Proctology / Rectoscopy

AGA-RE-PRO-LIFT & AGA-RE-PRO - Proctology/Rectoscopy examination chairs

Proctology examinations can be carried out in the knee-elbow position as well as in the lithotomy position. The examination chairs AGA-RE-PRO-LIFT (RPL-1060/EE) and AGA-RE-PRO (RP-1058/E) are equipped for the knee-elbow examination position. 

RPL-1060/EE, BKO-2522, RRH-65
RPL-1060/EE, BKO-2522, RRH-65
RP-1058/E, BKO-2522, RRH-65, RL-2060
RP-1058/E, BKO-2522, RRH-65, RL-2060

AGA-RE-PRO-LIFT - Examination chair with height adjustment

The AGA-RE-PRO-LIFT (Article No.  RPL-1060/EE) offers the following features:

  • The working eight may be adjusted from 650 mm up to 1160 mm (measured at the seat front edge), with full use of both motorized adjustments (height and seat section).
  • The low initial seating height eliminates the need for a fold-up step stool.
  • The shock- and scratch-resistant protective covers of the column and base are easy to clean, like all other components.
  • The wide base of the frame, equipped with levelling feet to compensate for uneven floors, ensures a high stability.
  • The ergonomic upholstery of the backrest (85-135 mm) and  seat (85 mm) provides a very high comfort level. A pelvic cutout has been added to the seat area.
  • The wedge-shaped backrest eliminates the need for a separate neck roll. 
  • A Trendelenburg position of 30° may be obtained by using the electric pelvic tilting in combination with the backrest adjustment. 
  • The backrest is continuously adjustable up to +54° with gas pressure spring. 
  • The electric adjustments of the seat (pelvic) tilting and the seat height are done with maintenance-free and extremely quiet electric motors, controlled by air pulses via foot switches. Drive specifications: 230V, 50/60Hz, 3,7A, 850W, IPX4, v=14 mm/s, 7000N.
Do you have questions? We are here to provide answers!

Contact us directly to get personalised advice. We will be happy to help!

Contact AGA now

The AGA-RE-PRO-LIFT includes, at the listed price

  • A pair of standard rails on the outside of the seat section,
  • Two slots (right/left side) for a colposcope holder
  • A grounded AC outlet at the rear of the column,
  • A stainless steel pan (300x200x65 mm) with holder,
  • A paper roll holder on the backrest,
  • The foot switch(es).
RPL-1060/EE - Detail
RPL-1060/EE - Detail
RPL-1060/EE - Detail
RPL-1060/EE - Detail

AGA-RE-PRO - Examination chair with adjustable rectoscopy bolster

The AGA-RE-PRO (Article No.  RP-1058/E) has no height adjustment. However, since the distance between the knee support plate and height-adjustable rectoscopy bolster is variable, the  position of the rectoscopy bolster can be adapted to each patient. This results in a safer examination position for the patient and an optimal working height for the physician.

  • The working height can be adjusted from 865 mm up to 1175 mm (measured at the seat front edge) using the electric tilting of the seat section, with a maintenance-free, spill-proof and extremely quiet electric motor, controlled by air pulses via a foot switch. Drive specifications: 230V, 50/60Hz, 3,7A, 850W, IPX4, v=14 mm/s, 7000N.
  • In order to facilitate the patient‘s positioning on the knee plate, the AGA-RE-PRO is equipped with a fold-up step stool (dimensions 490x320x250 mm, WxDxH).
  • The distance between the step stool and the knee support plate (in the lowest position) is 400 mm.

The AGA-RE-PRO includes, at the listed price:

  • A pair of standard rails on the outside of the seat section,
  • Two slots (right/left side) for a colposcope holder
  • A grounded AC outlet at the rear of the column,
  • A stainless steel pan (300x200x65 mm) with holder,
  • A paper roll holder on the backrest,
  • The foot switch

as well as

  • A fold-up step stool (490x320x250 mm, WxDxH),
  • A knee support plate.
RP-1058/E - Detail
RP-1058/E - Detail
Options
  • Motorized adjustable backrest with foot switch (instead of gas pressure spring assisted manual adjustment) - Article No. ERV

Accessories

The available accessories include: 

  • Height-adjustable rectoscopy bolster (Article No. RRH-65),
  • Pair of mounting clamps (Article No. BKO-2522). 
  • Pair of ring armrests (Article No. RL-2060)
  • For the examination position in the lithotomy position, the rectoscopy bolster can be replaced with various leg supports (leg rests, foot rests and heel rests).

More accessories such as mounting clamps, neck roll, ring armrests, various kinds of leg supports, rectoscopy bolster, leg and knee plates, centrifugal sink, electric backrest adjustment, colposcope holder and mobile base with central locking castors can be found under Accessories for Examination Chairs and in the AGA catalogue on pages 80-83.

AGA-RE-PRO-LIFT & AGA-RE-PRO Proctology / Rectoscopy examination chairs - Overview

  • Pelvic tilt adjustment (AGA-RE-PRO) 865-1175 mm, measured at the seat front edge
  • Height and pelvic tilt adjustment (AGA-RE-PRO-LIFT) 650 - 1150 mm, measured at the seat front edge, electric with foot switch
  • Height adjustment 650-850 mm (AGA-RE-PRO-LIFT)
  • Fixed height 865 mm  (AGA-RE-PRO) 
  • Backrest adjustment +54°
  • Width 580 mm (640 mm with standard rails)
  • Pelvic cutout
  • Levelling feet
  • Length 1150 mm (head/backrest 800 mm, seat section 350 mm)
  • Maximum load 200 kg
  • Product weight 80 kg (AGA-RE-PRO-LIFT), 90 kg (AGA-RE-PRO)
  • Frame - lacquered, see Frame Colours
  • Upholstery thickness 85-135 mm (backrest, with integrated wedge-shaped headrest) and 85 mm (seat section) for increased comfort
  • 21 Upholstery Colours available
AGA frame colours
Frame

  • The colour coating of the frame is available as a standard in three different colours (See colour selection card on the right):
    • light grey (RAL 7035),
    • white aluminium (RAL 9006),
    • pure white (RAL 9010).

  • The high-quality paint has a glossy finish, is easy to clean and resistant to disinfectants.

  • A different colour scheme (special order) is possible at extra charge, and subject to prior arrangements. Please notify us of the desired RAL colour.
AGA upholstery colours
Upholstery
  • The synthetic leathers used for the upholstery of our products, from the collection VOWAled Pisa (Vowalon) are characterized by their tensile strength, durability, longevity, easy cleaning and resistance to disinfectants. A large selection of colours is available.

  • We also offer the option of having the upholstery done in other colours or brands of synthetic leather. The corresponding materials should be sent to us after prior arrangement.

  • Electrically conductive (antistatic) synthetic leather upholstery (with earth contact) is available at extra charge. It is, however, included in the price for the operation and multifunction tables.
Article Numbers
Article NumberLength x Width (mm)Height (mm)FrameMax. load
RPL-1060/EE1150 x 580650 - 850Lacquered200 kg
RP-1058/E1150 x 580865Lacquered200 kg
BKO-2522 Chrome
RRH-65 Chrome
RL-2060
ERV

The product descriptions and article numbers can also be found in the AGA product catalogue on page 77.


[Translate to English:] AGA Sanitätsartikel GmbH – Katalog bestellen
Our product catalogue

Discover our current sales catalogue, featuring our long-standing products as well as several innovations.

Request the catalogue

More examination chairs made by AGA

With AGA Sanitätsartikel, you can select from a variety of different examination chairs the perfect chairs for your individual practice or healthcare facility. We offer examination chairs that are tailored to your exact needs - for every specialty, we have the perfect design in our product range:

GU-1058/E, BKO-2522, BH-2511, RL-2060
AGA-MED
GU-1062/G, RL-2060, BKO-2522, BH-2511
AGA-PERMO
UUS-3060/EE, BKG-600, BH-2511, RL-2060
AGA-URO-LIFT
UUS-3058/E, BKG-600, BH-2511, RL-2060
AGA-URO-MED
PRE-1067/EE, BKG-600, FES-2000
AGA-PROKTO-LIFT
RP-1058/E, BKO-2522, RRH-65, RL-2060
AGA-RE-PRO
Contact us
Logo von AGA Sanitätsartikel

+49 (0) 5731 82283

info@agasan.com