Operating Room (OR) Accessories

Arm Support - Chrome-plated, with swivel mechanism, PU-foam pads with black upholstery, dimensions 400x120 mm, mounting clamp for standard rail included - Article No. A-2047

Leg Holders - Set of two, fastened with hook-and-loop fasteners to the upholstered leg sections of the table, leg straps with hook-and-loop fasteners - Article No. BEFE-60

Wristlet - Stainless steel, with black strap (500x50 mm, LxW), mounting clamp for standard side rail required - Article No. HAFE-3050

Body Strap - Dimensions 2250x50 mm (LxW), stainless steel bolts (Ø 18 mm), two mounting clamps for standard side rails required - Article No. KÖGU-30230

Instrument Table - Stainless steel, dimensions 600x400 mm (LxW), lateral raised edge 15 mm - Mounting clamp for standard rail required - Article No. IT-3060

Shoulder/Side Supports - Set of two, height-adjustable, stainless steel, with swivel mechanism, antistatic upholstery (colour black), dimensions 200x100x40 mm (LxWxH) - Pair of clamps for standard rails required - Article No. SSH-3010

Side Support - Stainless steel, removable, antistatic upholstery (colour black), dimensions 180x80x30 mm (HxWxD), with clamp for standard rail - Article No. SST-3018

Arm/Hand Surgery Table - Stainless steel, height-adjustable 700-1135 mm, with floor stand, removable, antistatic upholstery (colour black), dimensions 650x250 mm (LxW), tabletop adjustable with spherical joint, with clamp for standard rail - Article No. AHT-3065

Anesthesia Pole - Stainless steel, Ø 18 mm pipe, clamp for standard rail required - Article No. NB-30560 (Pole length 560 mm) and Article No. NB-30640 (Pole length 640 mm)

Side Guard - Removable, dimensions 800 x 250 mm (LxH), with clamp for standard side rail 

• Lacquered, Article No. SG-1000/BK
• Stainless Steel, Article No. SG-3000/BK

Göpel Mounting Clamps - Set of two, adjustable, chrome-plated, suitable for standard rails - Article No. BKG-600

Göpel Leg Rests - Set of two, PU-foam black upholstery,  adjustable with spherical joint, two mounting clamps for standard side rails required - Article No. BHG-600

Mounting clamps - Set of two, chrome-plated, suitable for standard rails - Article No. BKO-2522

Leg rests - With plastic shells (set of two) and straps, mounting clamps (set of two) for standard rails required - Article No. BH-2511

Paper roll holder - Chrome-plated, to be mounted at the foot end, retrofitting is not possible - Article No. PU-2049

Mobile base with central locking castor system - Castors (Ø 50 mm). The base is equipped with two fixed castors (at the foot end) and two multi-directional castors (at the head end). The black foot pedal to lock/unlock is located at the head end of the base frame, retrofitting is not possible - Article No. LR/Z-50

Stainless steel bowl - With holder, dimensions 250x190x45 mm (LxWxD), retrofitting is not possible - Article No. VA-30/MP

Compartment for X-ray cassettes - Under the pelvic section, dimensions 435x305 mm (WxD), retrofitting is not possible - Article No. MP-RF

Leg plates - Removable, split and vertically/laterally adjustable, vertical adjustment range -90°/0° Lateral adjustment range (spread) 0°/90°, retrofitting is not possible - Article No. MP-BTSA

Headrest adjustment by gas pressure spring instead of clamping rod mechanism, retrofitting is not possible - Article No. KVG

Extra charge for foot switch instead of hand switch - Article No. FS-2

Ring armrests, set of two, dimensions 270x340x45 mm (HxLxW), colour black, mounting clamps for standard rails included - Article No. RL-2060/BK

Infusion (IV) holder, stainless steel, length 1700 mm, with four hooks and a mounting clamp, standard rail(s) required - Article No.  INF-30170/BKO