Contact us directly to get personalised advice. We will be happy to help!
Accessories for Multifunction Examination Tables
The following accessories (and more) are available to adapt the AGA multifunction examination tables to your specific needs: positioning aids, paper roll holders, castors and mobility system with central locking, side safety rails, standard rails, gas pressure spring for shock position/Trendelenburg and headrest adjustment, face cut-out in the headrest and upholstered insert.
Positioning Aids
Knee roll - Ø 180 x 560 mm, synthetic leather upholstery, with zipper closure - Article No. RLM-20
Neck roll - Ø 140 x 400 mm, synthetic leather upholstery, with zipper closure - Article No. RM-12
Wedge-shaped headrest - 450 x 400 x 80/10 mm, synthetic leather upholstery - with zipper closure - Article No. KKM-16
Half-round bolster - Ø 200 x 400 mm, synthetic leather upholstery, with zipper closure - Article No. HRM-14
Half-round bolster with strap - Ø 200 x 400 mm, synthetic leather upholstery, with zipper closure - Article No. HRM-14/Band
Half-round bolster with hook-and-loop fasteners - Ø 200 x 400 mm, synthetic leather upholstery, with zipper closure - Article No. HRM-14/Klett
A selection of 21 upholstery colours is available for all positioning aids, as it is for most AGA products.
Paper Roll Holders
For all AGA tables with fixed height (except SU-Models), chrome-plated. To be mounted on the leg frame.
- Chrome-plated, for table width 650 mm - Article No. P-2065
- Chrome-plated, for table width 800 mm - Article No. P-2080
- Chrome-plated, for table width 1000 mm - Article No. P-20100
For all AGA tables with height adjustment (except SU-Models), chrome-plated, with mounting hardware, to be attached to the tabletop frame.
- Chrome-plated, for table width 650 mm - Article No. P-2065/A
- Chrome-plated, for table width 800 mm - Article No. P-2080/A
- Chrome-plated, for table width 1000 mm - Article No. P-20100/A
Mobility
Set of four castors, Ø 75 mm - Incl. two locking castors - Article No. LR-75
Set of four castors, Ø 125 mm - Incl. two locking castors - Article No. LR-125
Mobile base on castors, Ø 75 mm, Roll-Lift-System - To be operated at the head and feet ends (press pedal twice) - Article No. LR/F-75
Mobile base on castors, Ø 125 mm, Roll-Lift-System - To be operated at the head and feet ends (press pedal twice) - Article No. LR/F-125
Central locking castor system, Ø 125 mm - All four double castors are connected by rods, to be operated at the head or feet end (press pedal once) - Article No. LR/Z-125
In all cases, please specify the required total height of the table including castors at time of order.
Side safety guards
Side guard, removable - Dimensions 800x250 mm (LxH), not retrofittable.
- Lacquered, see Frame Colours - Article No. SG-1000
- Chrome-plated - Article No. SG-2000
- Stainless steel - Article No. SG-3000
Miscellaneous

Infusion (IV) holder - Stainless steel, length 1700 mm, with four hooks and fixing clamp (screw system). Please specify the exact desired position of the fixing clamp on the tabletop frame. Retrofitting is possible to a limited extent only - Article No. INF-1720/VA
Infusion (IV) holder - Stainless steel, length 1700 mm, with four hooks and a mounting clamp. Standard rail(s) required - Article No. INF- 30170/BKO
Headrest adjustment with gas pressure spring - Instead of grid or clamping rod mechanism, for almost all AGA tables, not retrofittable - Article No. KVG
Face cutout in the headrest - Oval shape (approx. 205x105 mm, LxW), not retrofittable - Article No. GS-1710
Upholstered insert - To close the face cutout - Article No. EfGS
Available in 21 Upholstery Colours.
Patient strapping belt - to secure the patient's position, 21 upholstery colours available -
- Dimensions 2200x250 mm (LxB), Article No. PG-220
- Dimensions 2600x250 mm (LxB), Article No. PG-260
Standard rails - Set of two, 25x10 mm (LxW), stainless steel, with spacers. Available in different lengths (the digits in the article number indicate the respective length in cm). Please specify the desired position of the rail on the table frame (head, foot or center of the table) at time of order. Retrofitting is possible to a limited extent only.
- Length 400 mm - Article No. OPS-40/A
- Length 600 mm - Article No. OPS-60/A
- Length 1000 mm - Article No. OPS-100/A
- Length 1400 mm - Article No. OPS-140/A
- Length 1700 mm - Article No. OPS-170/A
Göpel Leg Rests - Set of two, PU-foam black upholstery, adjustable with spherical joint, two mounting clamps for standard side rails required - Article No. BHG-600
Göpel Mounting Clamps - Set of two, adjustable, chrome-plated, suitable for standard rails - Article No. BKG-600
Arm Support - Chrome-plated, with swivel mechanism, PU-foam pads with black upholstery, dimensions 400x120 mm, mounting clamp for standard rail included - Article No. A-2047
Ring armrests, set of two, dimensions 270x340x45 mm (HxLxW), colour black, mounting clamps for standard rails included - Article No. RL-2060/BK
Rectoscopy bolster - Continuously height-adjustable, 740x65x550 mm (LxWxH) - Article No. RRH-65
The complete product descriptions can also be found in the AGA catalogue on pages 90-91.
![[Translate to English:] AGA Sanitätsartikel GmbH – Katalog bestellen [Translate to English:] AGA Sanitätsartikel GmbH – Katalog bestellen](fileadmin/user_upload/agasan-katalog-cta.png)
Discover our current sales catalogue, featuring our long-standing products as well as several innovations.
Continuous adjustment of the headrest and side guards
Further AGA products of interest for you

+49 (0) 5731 82283