|
|

The standard versions of both our
AGA-RE-PRO-LIFT and AGA-RE-PRO proctologic examination chairs
are equipped for conducting examinations mainly in a knee-elbow kneeling
position, although where desired, additional leg supports can be fitted to
perform examinations in a lithotomy position.
Our AGA-RE-PRO-LIFT proctologic examination chair doesn’t require a
footrest due to its construction design. Height adjustability up to 850mm
is attained by an independent, maintenance free electric motor with ultra
low-noise emission, controlled with the aid of a separate pneumatic foot
switch and therefore allowing an ideal user working height.
The AGA-RE-PRO-LIFT’s all-inclusive price comprises of a pair of
OP-Rails pre-attached onto the chair frame, an electric socket, a pair of
fixing clamps, a rectoscopy bolster, a paper roll holder and a stainless
steel pan as depicted in fig. 1.
Drive specifications of each motor:
Dual 230VAC, 50Hz, 2.4 A, 510W, IP 55, v=14 mm/s, 7000N

Our AGA-RE-PRO
proctologic examination chair differs from the AGA-RE-PRO-LIFT
in that it is non height adjustable, it is instead supplied with a
pivoted retractable foot rest with dimensions of 490 * 320 * 250 mm
(B*D*H). However, since the rectoscopy bolster is height adjustable
(see fig. 2) the distance between the bolster and the knee rest is
variable. It can be set securely by the attending medical practitioner
to suit individual patient requirements, and to enable an adequate
examination position as well as allowing an ideal user working height.
In the event that an ideal working height cannot be positioned high
enough, the seat tilt angle itself can be raised from 865 up to 1175mm
(measured from seat front), attained by an independent, maintenance
free electric motor with ultra low-noise emission, controlled with the
aid of a pneumatic foot switch.
The distance between the knee rest and pivoted retractable footrest is
400mm.
The AGA-RE-PRO’s all-inclusive price comprises of a pair of
OP-Rails pre-attached onto the chair frame, an electric socket, a pair
of fixing clamps, a rectoscopy bolster, a paper roll holder, a knee
rest, a retractable footrest and a stainless steel pan as depicted in
fig. 2.
Finally, both the AGA-RE-PRO-LIFT and AGA-RE-PRO
proctologic examination chairs can be equipped with an electromotive
adjustable backrest controlled with the aid of a separate pneumatic
foot switch; available per surcharge under the additional article code
ERV.
Drive
Spezifications :
230VAC, 50Hz, 2,4A, 510W, IP55, v=14mm/s, 7000N
|
|