|
|
The special
features of our gynecological examination chairs are not only the high
performance but also the large adjustment ranges.
The working height of the model AGA-LIFT is for example
continuously adjustable by using both electromotive drives over a
range of 650 mm up to 1160 mm (mea-sured at the
front end of its seat). Thus it allows an ideal working height for the
user. AGA-LIFT’s low seating height eliminates the need for a
retractable foot rest.
The different thicknesses of the upholstered back rest (75-140 mm) and
the extra thick upholstered seat (80 mm) provide the AGA-LIFT
with a high degree of sea-ting comfort. This is
possible by employment of foam padding which is carefully matched with
varying densities. Thanks to the wedge-shaped back rest there is no
need for a separate neck bolster.
With help of the electromotive pelvis positioning and the
electromotive adjustable back rest a Trendelenburg position of up to
30° is possible. Additionally the back rest is adjustable to + 54°.
The raising of the
pelvis position and the adjustments of the seat height and the back
rest are powered with help of three maintenance-free and ultralow-noise
electromotive drives and controlled by pneumatic pulsed with a foot
switch.
The AGA-LIFT`s all-inclusive price includes a pair of OP-rails
installed on the seat, a stainless steel pan and a paper dispenser.
Göpel leg rests Article No.: GBH-2000 as shown in photo 1 and Göpel-type
fixing clamps Article No.: BKG-600 are available at a surcharge as
well as the foot rests with adjustable foot supports Article No.:
FUS-2000 as shown in photo 2 and Göpel-type fixing clamps Article No.:
BKG-600.
Further accessories are shown and described on the pages 84 / 85.
Drive
specifications of each motor :
230V, 50Hz., 2.4A, 510W, IP55, v=14 mm/s, 7000N
230V, 50Hz., 2.4A, 510W, IP55, v=14 mm/s, 7000N
230V, 50Hz., 1.5A, 350W, IP55, v=10 mm/s, 3500N
|
|
