|
These special examination- and ECG
tables as depicted in fig. 1 are available with either chrome plated,
plastic-coated, or Cr-Ni 18/10 stainless steel frames. They are
extremely stable and robust due to reinforced brackets on all frame
corners as well as lateral struts between both legs therefore allowing
a longitudinal bracing to be dispensable.
The special examination and ECG
tables have a stepless adjustable headrest, which can be set to ± 30°
(as depicted under fig. 2).
These wall-mounted
examination tables are available with either chrome plated,
plastic-coated, or Cr-Ni 18/10 stainless steel frames. They are quick
and easy to set up and designed foremost for use in areas where a
permanently available table is not always required or where space is
limited.
Both leg supports are each equipped with a safeguard against buckling,
which the user must lock and unlock before and after use. Multiple
reinforced wall brackets are included in the scope of delivery
(overall table length including brackets is 1990mm).
Due to the design of the wall brackets, the headrest position must be
indicated upon order, either on the left or on the right hand side,
(fig. 3 depicts left). These examination tables can also be mounted
vertically (surcharge applies).
All three of the 800mm wide wall-mounted examination table heights
denoted here are construed generally to 900 mm. |
