This patient-transporter captivates not only through functionality, but also by its sheer optic and user-friendly design.

Walls and doors, as well as the patient transporter itself, are protected due to a continuous black rubber bumper firmly affixed onto the upholstery frame and on both pivotal sidebars.

The patient-transporter has light, comfortable manoeuvrability with two chrome push bars, one each on opposite ends.

The ø125mm central-locking double-castors can be activated or released by foot-operated pedals situated diagonally opposite one another on either side of the transporter.

The head section and main lying area both have an overall upholstery thickness of 64mm. These areas, as well as both of the upholstered pivotal sidebars, are covered with leatherette.

There is ca. 600mm lying space between both sidebars.

The head section has a 300N gas spring mechanism, with stepless variability up to + 30°. Activation is via a red release button at the front end, directly underneath the head section.

Both sidebars, whose dimensions are 760*230mm (L/H) have pivotal adjusting mechanisms that can be secured with a sliding bolt. When both sidebars are positioned faced downwards, the overall width of the upholstered area is increased up to ca. 700mm.
At the front end, there are built-in brackets parallel to one another on either side to hold an optionally available infusion pole (ø18 mm).

 

A cage basket is available against surcharge, dimensions ca. 550*290*190mm (W/D/H), plastic coated in RAL7035 light grey and extractable from either side.