AGA Sanitätsartikel GmbH

Löhner Straße 198b
D-32584 Löhne
Telefon :  +49 (0) 5731 82283
Telefax : +49 (0) 5731 81976

 

OP, Multi-Purpose,

X-Ray Tables and Accessories

 
Examination Tables
 
Phlebological Tables
 
Cardiography Tables
 

Transfusions Tables

and Chairs

 
Stainless Steel Tables
 
Multi-Purpose Tables
 
Universal Tables
 
Therapy- and Gymnastics Tables
 
Massage Benches
 
Paravents, Furniture, Miscellaneous and Accessories

 

 

 

 

 

 

   

 

 

                    

                     

 

This blood-donor chair is an indispensable aid for any medical practice.

Article Nos.: BS‑2000 (photo 4) and BS‑2000/1 (photo2) have a polished and the Article Nos.: BS-1000 (photo 3) and BS-1000/1 (photo 1) have a black quintuple arm aluminium base. Article Nos.: BS‑2000 and BS‑1000 are supplied with two armrests and the Article Nos.: BS‑2000/1 and BS‑1000/1 with one armrest.

Their armrests are adjustable for height, tilt and rotation, and may be rigidly clamped in any position. The single armrest may be installed either on the left or right side, simply by inserting it into the mounting brackets. The heights of the seats of all these chairs are adjustable over the range of 420 mm to 540 mm.

Although their seats are free to rotate, under Article No.: BSF, we supply a latching mechanism that will prevent their seats from rotating.

Their backrests are continuously adjustable for height and inclination. The blood-donor chairs are even available with double castors without surcharge (please advise upon ordering).

The frame is made of flat oval tubes. The upholstered seat and back rests offer a high seating comfort. The seat height is approx. 500 mm and the distance between the wedge-shaped upholstered arm rests is 450 mm.

 

The reclining chair with upholstered armrests Article No.: KL-1070/MAL is equip-ped with an easy to use adjustment mechanism.

This adjustment mechanism is placed underneath the armrests. It is operated with help of the robust, plastic-coated foot support. The foot and backrests move simul-taneously. As the chair is continuously adjustable any position is possible. Thus a total reclining and relaxation is guaranteed.

The frame is made of light steel.

The complete reclining chair weighs approx. 10 kg with a maximum capacity of up to 130 kg.

It may be folded up within a few seconds and stored (dimensions approx. 1100 x 710 x 400 mm) when the chair is not required.
The reclining chair is equipped with an extra-soft upholstering to be as comfor-table as possible over lengthy periods of reclining during transfusions or radiation therapy.

A neck bolster Article No.: HRM-14/KL is available at a surcharge.

 

 

 

 

Back

Page 1 2 3  

Forward