|
|
The height of our
Bobath tables is adjusted by means of a crank on their foot end that
may be slid forward beneath their tops when not in use.
All AGA‑tables equipped with height adjustments run on precision
dual-box-section guides in order to prevent lateral and torsional
motions of their tops. Their top-quality upholstering extends 20 mm
side ways, covering the edges of their wooden tops. The reduction
ratio of the gear drive on their height-adjustment me-chanism
(10 mm/full rotation of the adjusting crank) is ideal for providing
smooth, effortless and rapid height adjustments, even while heavy
patients are placed on them.
The chromium-plated crossmembers on the bottom of their base withstand
ad-verse environmental influences, such as
jolts from vacuum cleaners, better than plastic-coated constructions.
The article number for the Bobath table shown in photo 1, above, is H‑Bobath/H 110.
The Bobath table with Article No.: H‑Bobath/E 110 (not shown) differs
from that shown in photo 1 in the height-adjustment mechanism powered
by an electricomotive drive controlled by pressure pulses from a
pneumatic foot-switch.
Drive specifications:
230VAC, 50Hz, 2.4A, 510W, IP 55, v=14 mm/s 7000N
Our Bobath tables
with Article Nos.: H‑Bobath/E 120 and H‑Bobath/E 160 and that with
Article No.: H‑Bobath/E 110 are different in the height adjustment
range of 440 mm, instead of 200 mm. A security
locking box is included.
|
|
