OP, Multi-Purpose,

X-Ray Tables and Accessories

Transfusion Tables

and Chairs

The AGA-PHLEBO-LIFT is also available under article no. VEKO-1060/EE as a two-piece topped version purely for phlebology use (recommended with heel rest under article no. FR-60), and is equipped with dual, maintenance free, water resistant, smooth-running motors for stepless height and tilt adjustment that are controlled by pneumatic foot-operated switches enabling manoeuvrability into virtually any position from near vertical through to horizontal and even into the shock position tilted 20° negative should a patient lose consciousness.
The base and column covers used on the AGA-PHLEBO-LIFT or PHLEBO-MAT are impact resistant and are just as simple to clean as the attached components. It has a generously dimensioned base construction and is equipped with an additional pull-out support to ensure even further stability. The canopy design itself can be supplied in colour tones to match present interior décor at no extra cost.

 You can close the cut-out at the foot end with the upholstery insert order No. PEF-1043, which is available against a surcharge.

The all-inclusive price of either the AGA-PHLEBO-LIFT or PHLEBO-MAT comprise of a pair of OP-Rails pre-attached onto the table frame, a pair of ring shaped armrests with fixing clamps and a black footstep.

To secure the patient an optional strapping belt (2200*200mm – L/B) is available under PG-220, as is a paper roll holder under P-2065/A.

To enable mobility the AGA-PHLEBO-LIFT or PHLEBO-MAT can be supplied with an optional central-locking castor system under article no. LR/Z-50.

Drive specifications of each motor:
Dual 230VAC, 50Hz, 2.4A, 510W, IP 55, v=14 mm/s, 7000N

To ease patient treatment and to enable medical personal the use of both hands when leg bandaging, an optionally available heel rest under article no. FR-60 as depicted in fig. 3 is highly recommended.

Our two-piece topped AGA-PHLEBO-MAT Phlebology table differs from the AGA-PHLEBO-LIFT in that it is non height adjustable. It is supplied with a working height of 930mm, although it does retain electromotive tilt adjustability and is available under article no. VEKO-1062/E.