|
Our
AGA-PHLEBO-LIFT Phlebology tables can be manoeuvred into virtually
any position from near vertical through to horizontal and even into
the shock position tilted 20° negative should a patient lose
consciousness.
The AGA-PHLEBO-LIFT is equipped with dual, maintenance free,
water resistant, smooth-running motors for stepless height and tilt
adjustment that are controlled by pneumatic foot-operated switches.
Drive specifications of each motor:
Dual 230VAC, 50Hz, 2.4A, 510W, IP 55, v=14 mm/s, 7000N
To enable mobility
the AGA-PHLEBO-LIFT or PHLEBO-MAT can be supplied with
an optional central-locking castor system under article no. LR/Z-50.
Further optionally available items include a patient strapping belt
(2200*200mm – L/B) under PG-220 and a paper roll holder under
P-2065/A.
You can close the
cut-out at the foot end with the upholstery insert order No. PEF-1043,
which is available against a surcharge.
An optionally available heel rest under
article no. FR-60 is highly recommended.
Patients simply step onto the AGA-PHLEBO-LIFT, are then brought
into the required treatment position via electromotive height and tilt
adjustment. They can place their heels onto the heel rest bolster (see
fig. 6) which will enable medical personal the use of both hands when leg
bandaging is necessary.
|
