|
The multi-purpose
table AGA-POWER-MAT has an electromotive height adjustable,
anodized lifting column. Height adjustability is actuated by a
hand-held operator switch, which can be optionally replaced with a
foot-operated switch instead at additional cost under article number
FS-2. The table is supplied with electrically conductive and
detachable leatherette upholstery (made from a mixture of cotton and
polyester, and 100% PVC-Compound coated). To enable the attachment of
accessories it also includes matching pairs of OP-Rails on each flank
except the headrest (see accessories on pages 18 and 85).
The AGA-POWER-MAT
with plastic coated steel frame and base stand cover is available
under article number MP-1050/5E or alternatively with a lacquered
stainless steel frame with a stainless steel base stand cover under
article number MP-3050/5E.
Our AGA-POWER-MAT
multi-purpose tables are also equipped with a stepless adjustable
headrest, which can be set to ± 30°. The adjustable back- and leg rests
can be set with the aid of stepless gas springs, whereby the leg rests can
be dropped down fully by 90°. A central locking system with Ø50mm castors
under article number LR/Z-50 and a paper-roll holder under article number
PU-6000 are both optionally available at additional cost. Note: The
paper-roll holder is not retrofittable!
AGA-POWER-MAT
adjustment ranges are as follows:
-Backrest from +45° to -20°
-Trendelenburg: 20°
-Anti-Trendelenburg: 8°
-Seat: +40° to -10°
-Height: from 800mm up to 1100mm
-Headrest from +30° to -30°
-Leg rests from 0° to -90°
Drive
specifications:
230VAC, 50Hz., 0,8A, IP30, v=10mm/s, 3000N
|
