|
|
Note:
Due to its overall versatility, our AGA-UNI-MED multi-purpose table
denoted under article number A-2065/EE is described in detail
in the section
OP, Multi-Purpose, X-Ray Tables and
Accessories (page 8).
The AGA-UNI-MED multipurpose table can be found in proctoscopy
and rectoscopy practises, and in the practises of surgeons,
gynaecologists and general practitioners. It has a three sectioned,
cushioned top where each individual part can be stepless adjusted as
required. Figs. 2 and 3 below each depict an AGA-UNI-MED tilted
to its maximum front and rear tilted angle of 25° respectively.
The AGA-UNI-MED
multi purpose tables’ scope of delivery (as per fig. 2) includes a pair of
leg rests with white plastic shells with securing straps and fixing clamps,
a pair of matching parallel OP-Rails, a stainless steel pan and paper roll
holder.
Drive specifications of
each motor:
Dual 230VAC, 50/Hz, 2.4A, 510W, IP 55, v=14 mm/s, 7000N
Our
AGA-UNI-MED’s are equipped with dual, maintenance free, water
resistant, smooth-running motors for stepless height and tilt
adjustment that are controlled by pneumatic foot-operated switches.
It has a generously dimensioned base construction and is equipped with
levelling screws to ensure even further stability. The canopy design
itself can be supplied in colour tones to match present interior décor
at no extra cost.
Castors under article number LR-75, or alternatively a central locking
system under LR/Z-125, are optionally available at additional cost.
|
|
