|
|
Our range of
Echocardiography Tables has been extended. In comparison to previous
models, we now offer two different dimensioned detachable cut-out
types either in the headrest section (see fig. 1; 335*260mm – L/B) or
in the main laying area (see fig. 2; 400*300mm – L/B).
Our
echocardiography tables have been generously dimensioned to include
the larger 400*300mm upholstered laying area cut-out, therefore
enhancing effective cardiac examinations with an ultrasonic transducer
where necessary.
When either of the upholstered cut-outs are re-fitted (e.g. as per
fig. 3) the echocardiography table is converted into an
electrocardiography table.
All three depicted examination tables differ from one another in that
they vary in height adjustability, hence the tables depicted in figs.
1 & 2 are equipped with an independent, maintenance free, water
resistant, smooth-running motor for stepless height adjustability and
actuated by a hand-held operator switch. The table depicted under fig.
1 (H-EKA1080/E900) is additionally equipped with a safety switch box
and a height adjustability range of 400mm. The table depicted under
fig. 2 (H-EKA1080/E) does not have a safety switch box and its height
adjustability range is 200mm.
Drive specifications:
230VAC, 50Hz, 2.4A, 510W, IP 55, v=14 mm/s, 7000N
The table depicted
under fig. 3 (H-EKA1080/H) also has a height adjustability range of
200mm, but is crank-driven manually. The crank-drive is situated at
the foot end and can be conveniently slid underneath the table when
not in use.
|
|
