The combined
multi-purpose examination table depicted under fig. 1 and denoted
under article number K-3065/3 is manufactured with a stainless-steel
frame (Cr-Ni steel 18/10) and has a three pieced tabletop.
All three upholstered sections are individually stepless adjustable
and can therefore be used not only by general practitioners, but
various other medical practitioners who for example need to conduct
gynaecological examinations or perform examinations in a lithotomy
position.
The all-inclusive price for the K-3065/3 comprises of a pair of leg
rests with plastic shells and fixing clamps and a stainless steel pan.
The combined
multi-purpose examination table under article number K-3065/3IR and
depicted in fig. 2 differs only from the aforementioned table in that
this particular model is additionally equipped with a height
adjustable rectoscopy bolster, thus enabling examinations to be
conducted in a knee-elbow kneeling position.
The wall-mounted
examination table depicted under fig. 3 is quick and easy to set up
and is designed foremost for use in areas where a permanently
available table is not always required or where space is limited.
The frame, leg supports and wall brackets are all completely made of
Cr-Ni 18/10 stainless steel. Both leg supports are each equipped with
a safeguard against buckling, which the user must lock and unlock
before and after use. Multiple reinforced wall brackets are included
in the scope of delivery (overall table length including brackets is
1990mm).
Due to the design of the wall brackets, the headrest position must be
indicated upon order, either on the left or on the right hand side,
(fig. 3 depicting left).
These examination tables can also be mounted vertically (surcharge
applies).
The WKL-3065 is also available 700, 750 or 800mm high at no extra
cost, with the exception of the WKL-3080 which can only be supplied in
900 mm height.
|
